Blueant X3 - Page 7

Duo Mode - Pairing two X3 Speakers together
Dual speaker wireless stereo pairing for wide stereo sound stage.
1. Press the power button on the first speaker to turn the speaker “On".
2. Press and hold the Volume + and Volume - buttons on the first speaker until the speaker says, “Duo Mode
pairing” then release the buttons.
Press the power button @) on the second speaker to turn the speaker “On”
Press and hold the Volume + and Volume - buttons on the second speaker until the speaker says, “Duo Mode
pairing” then release the buttons.
Please wait until one speaker says “Duo Mode connected”. This may take up to 1 minute. The speakers are now
connected to each other.
The speaker that says “Duo Mode connected” is the master speaker, and this is the speaker that you should pair
with your phone.
»w
o o
For Bluetooth pairing search for “BlueAnt X3" on your phone. If you receive a phone call while in Duo Mode, the call
will only come through the master speaker. When in Duo Mode and you power off one speaker, both speakers will
power off.
When you power on the speakers, they need to be turned on individually.
When both speakers are powered on, Duo Mode will automatically reconnect and you will hear “Duo Mode connected”.
To disconnect Duo Mode, press and hold Volume + and Volume - until you hear “Duo Mode disconnected”.
To clear Duo Mode pairing, press and hold Volume + and Volume - until the speaker says “Duo Mode cleared”.
This takes about 8 seconds