27
www.BlueBoxOptics.com V2.4
niji
Figure 17: niji Unit with all Modules
7 Optics
Optics should be handled minimally and should not be exposed to contamination
including dust, finger prints and solvents. We have a specified cleaning procedure
should the surface of the filters be contaminated through handling, exposure to dust
etc. Full instructions can be found on our website, www.blueboxoptics.com.
8 Serial Command Control
The equipment can be controlled via the software provided or through a serial
connection over USB or RS232. Both interfaces are located at the rear of the unit
(Figure 2). The equipment can be controlled using command strings.
To Next Page