English BlueCard
Operation Instructions
BP-2002S
Turning On and Off
The system will turn on automatically to perform card reading when it is
within the range of a valid signal card. It will automatically shut off when
card reading is complete.
Reading Cards
Position a card in front of the blue reading head. 4 flashes of the red
indicator light accompanied by 1 “beep” sound means that a reading has been
made.
BP-2002F
Turning On and Off
The system will turn on automatically to perform card reading when it is
within the range of a valid signal card. It will automatically shut off when
card reading is complete.
Reading Cards
Position a card in front of the blue reading head. 4 flashes of the red indicator
light accompanied by 1 “beep” sound means that a reading has been made.
The BP-2002F will display the last four digits of the signal card’s
hexadecimal ID number. For example:
This number can be later referred to during status inquiry.
.
To Next Page
Loading...