bluefin Scout - Slide-In Fin Attachment

● Insert the fin into the fin box slot via the end gap. Figure 1
● Slide the clip, connected to the fin, into the side of the fin-box and through the fin body. The clip should be
secure and not come back through without pressing down the lock on the top of the clip.
● To remove the fin from the fin box, press down on the lock at the top of the clip and feed it back through
the clip slot, you can then slide the fin out of the finbox.
SLIDE IN FIN
A TTACHMENT
Before you begin please ensure the fin box
slot is clean and free of sand and grit.
Slide-in fin
Smart Lock Fin System