Blueridge BMKH18M-LM User Manual

CONTENTS
..................................................................................................
05
Safety precautions
......................................................................................
01
............................................
06
...............................................................................
11
.............................................................
12
Parts name
Owner's Manual
.........................................................................................
13
Original Instructions
Split Air Conditioner
.......................................................................................
18
..................................................................
19
Operation and introduction of remote contr oller
Clean and maintenance
Checked items before maintenance
Installation notice
Installation of indoor unit
Test and operation
Configuration of connection pipe
..............................................................................
15
Thank you for choosing our product.
Please read this Owner’s Manual carefully before operation and
retain it for future reference.
NOTE：
Actual product may be different from graphics,
please refer to actual products.

Blueridge BMKH18M-LM Specifications

General

Cooling Capacity (BTU/h)	18000
HSPF	9
Sound Level (dB)	54
Phase	1
Refrigerant	R410A
Voltage (V)	208-230
Outdoor Unit Noise Level	54 dB

Summary

Safety Precautions

Installation Safety

Critical safety measures for unit installation, including warnings and cautions.

Operation and Maintenance Safety

Safety guidelines for operating and maintaining the unit, including warnings and cautions.

Clean and Maintenance

Cleaning Surfaces and Filters

Error Code Troubleshooting

Lists error codes and troubleshooting steps.

Checked Items Before Maintenance

Phenomenon Analysis and Solutions

Analyzes common phenomena and provides solutions for check items.

Installation Notice

Installation Safety Precautions

Critical safety measures for installation and relocation.

Installation of Indoor Unit

Site Selection and Frame Mounting

Piping and Outlet Preparation

Drain Hose and Pipe Connection

Electrical Wiring

Unit Hanging and Securing

Test and Operation

Post-Installation Checks

Verifies essential items after installation.

Operational Testing Procedure

Outlines steps for performing a test run.