Blueridge XK19 User Manual

Wired Remote Controller XK19
8
3.7 Sleep Setting
Sleep on: Press Function under on state of the unit till the unit enters the Sleep setting
interface. Press Enter/Cancel to conrm the setting.
Sleep off: When the Sleep function is activated, press Function to enter the Sleep setting
interface. After that, press Enter/Cancel to can this function.
In the Cooling or Dry mode, the temperature will increase by 1
℃
after the unit runs under Sleep
1 for 1hr and 1
℃
after another 1hr.After that, the unit will run at this temperature.
In the Heating mode, the temperature will decrease by 1
℃
after the unit runs under Sleep 1 for
1hr and 1
℃
after another 1hr. After that, the unit will run at this temperature.
Sleep setting is shown as Fig.10.
Fig. 10 Sleep Setting

Blueridge XK19 Specifications

General

Brand	Blueridge
Model	XK19
Category	Remote Control
Language	English