General Maintenance
Ø Inspect electrical cords and electrical connections.
Ø Keep machine clean and free of debris.
Ø Check for misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
Ø Check to ensure the torch holder is clean and free of debris.
o Inspect the inside of the holder as well.
Ø Inspect all torch tips and ensure they are not damaged and the small cutting holes are clean.
Ø Inspect cutting hoses to ensure they are not damaged.
Ø Occasionally oil the wheels of the machine.
o DO NOT oil and connection points used in the gas/oxy system!
To Next Page
Loading...