Bluerock Tools TYP-28A - Safety; Pre-Operational Safety Checks; Operational Safety Checks

TYP- 28A MAG DRILL
1
Safety
DO NOT USE THIS MACHINE UNLESS YOU HAVE READ THE
OPERATING INSTRUCTIONS!
Safety glasses must be worn at all
times in work areas.
Long and loose hair must be
contained.
Appropriate footwear must be worn.
Close fitting/protective clothing
must be worn.
Safety gloves should be worn at all
times and jewelry must not be worn.
Hearing protection should be
worn when using this machine.
Hard-hat must be worn while using
machine.
Dust mask must be worn while
using this machine.
Read operational manual prior to use.
PRE-OPERATIONAL SAFETY CHECKS
Ø Examine the power cord and plug for damage. This tool is supplied with a ground plug and
must always be used with the proper grounded circuit.
Ø Examine the body of the machine and inspect for damage or defects.
OPERATIONAL SAFETY CHECKS
Ø ONLY to be operated by qualified personal who have read instructions.
o NOTE: Failure to read and follow instructions could result in electrical shock, fire,
property damage and/or serious injury!
Ø DO ensure all non-essential people are clear of the immediate work area.
Ø DO keep body parts, clothing & power cords clear of turning/cutting pieces. Stay alert and
use common since when using this tool.
Chapter
1