4. Safety Information
♦ Check for any exception, due to local laws and limitation, in usage of Bluetooth devices.
♦ Ensure attention and focus, when using headset while driving.
♦ Use only adaptor approved for use with this particular device. The use of any other types will invalidate
any approval or warranty and may be dangerous.
♦ Use only battery approved for use with this particular device. The use of any other types will invalidate
any approval or warranty and may be dangerous.
♦ Keep the headset and accessories out of reach from children.
♦ Turn off the headset prior to boarding an aircraft. Do not use the headset in an aircraft.
♦ Observe all signs in designated areas that may prohibit the use of electronics or RF equipments.
These could include hospitals, patrol stations, laboratories, potentially explosive surroundings and etc.
5. Care and Maintenance
♦ Do not attempt to open the headset, only the authorized service partners should perform the service.
Please check with your local dealer.
♦ Do not expose the headset to extreme high or low temperatures.
♦ Do not expose the headset to liquid, moisture or humidity; it is not waterproof.
♦ Do not expose the headset to dusty and dirty environment; moving parts may be clogged and prevent
proper usage.
♦ Do not dispose the headset to fire; may result in explosion.
♦ Do not dispose or store the headset in high heat. High temperature may shorten the life of electronic
components, damage battery, deform plastic parts.
♦ Do not use harsh cleaning solvents or strong detergents to clean the headset. Only use a soft damp
cloth to clean the headset.
♦ Do not throw, drop or knock the headset; Rough handling can damage the headset.
♦ Do keep the headset in proper storage, dry place, free from dust and extreme temperatures when not
in use.
8
6. Troubleshooting
If the headset is unable to operate properly; for example unable to power on, unable to pair/connect
to the phone and etc, please try the following:
♦ Ensure the battery is properly charged; fully drained battery may take a while to charge up.
♦ Ensure the headset and /or the phone is tuned on.
♦ Ensure the headset is paired to the phone; refer to pairing procedure.
♦ Ensure the Bluetooth feature on the phone is activated; and connected to the headset.
♦ Ensure both the headset and phone is within 10 meters operating range. There are no
obstructions or hazards in between.
♦ Ensure the phone list on the headset is not full (up to 8 phones).
♦ Ensure the phone has the latest or firmware is not corrupted; send phone for firmware update.
♦ Power off and on the devices if the above steps do not solve the problem.
If problem persist after taken all above steps, send the headset to authorized service center. Check
with the local dealer.
9
To Next Page
Loading...