7. Product Specifications
Model Name : Bluetooth Headset
Bluetooth Compliance : Bluetooth Specifications version 1.2
Supported Profiles : Headset and Handsfree
Frequency Band : 2.4GHz ISM Spectrum; frequency hopping 79 channels
Modulation : GFSK (Gaussian Frequency Shift Keying)
RF Power : Class 2, 0-4dBm
Operating Range : Up to 10m (open area)
Talk Time* : Up to 9hrs
Standby Time* : Up to 240hrs
Connection : Point-to-Point
Security : Security mode 3 (pairing, encryption, authentication)
Power Source : Rechargeable Li-Polymer 180mAh; replaceable
Charging : Universal Adaptor 5V/180mA
Charging Time : Up to 2.5hrs
Compatibility : Mobile phones supporting Bluetooth 1.1 (and above) specifications;
Headset and/or Handsfree profiles
Dimension : .59.5Lx19.5Wx12.5H mm
Weight : 16.0g (with ear-hook)
* may vary based on users’ operating mode, make and model of phones
10
8. Bluetooth Headset: Quick Reference Guide
User State Button Press LED Indicator Audible
Current Next Action/Status MFB Vol+ Vol- Blue Red Tone
OFF To Power On/Standby Hold 2s Flash 3x Medley
ON/Standby To Power Off Hold 5s Flash 3x Medley
ON/Standby To Pairing Hold 2s Hold 2s
Blue Flash 3x; Red/Blue
alternating for 2mins
Beep 1x
Pairing Pairing Passed Flash 3x
Pairing Pairing Failed/Timeout Beep Long
Standby Connected to Phone Beep 2x
Standby
Disconnected from
Phone
Beep Long
Standby
To Make Call; from
phone
Follow normal ways on phone keypads
Standby
To Make Call; last
number redial
Hold 2s Beep 1x
Standby To Make Call; voice dial Once After Beep tone; say voice tag
Call Incoming To Answer
Once upon
ring tone
Ring tone
To Answer; from phone Follow normal ways on phone; talk on phone
Call Incoming To Reject
Hold 2s upon
ring tone
Ring tone
Talk To End Call Once Beep 1x
Talk
To Transfer between
Headset and Phone; vice
verse
3
Hold 5s Beep 1x
Talk To Mute/Unmute Call Once Once
Beep 1x,
beep/20s
Talk To Hold/Unhold Call
3
Hold 2s Beep 1x
Hold To Make Another Call
2,3
Make call from phone; 2 active calls
Talk To Call Wait
(answer 2nd call)
2,3
Hold 2s Beep 1x
Talk To Swap Calls
2,3
Hold 2s Beep 1x
Talk To Conference Calls
2,3
Hold 2s Beep 1x
Standby/ Talk To Increase Volume Once/step Beep 1x
Standby/Talk To Decrease Volume Once/step Beep 1x
Standby/Talk Low Battery Flash/4s Beep/1min
1. Features are dependant on make and model of phones
2. To activate this function, please make sure the assigned tele-communication agent
provides this service
3. To activate this function, please refer to the instruction of your mobile phone to make sure
your phone program supports this function
11
To Next Page
Loading...