Need help?Do you have a question about the BlueSpot M3-M10 and is the answer not in the manual?
Maintain tool in good condition, keep work area clean, and ensure good footing.
Wear appropriate clothing, eye/face protection, and respiratory protection.
Do not use damaged tools, operate under influence, or use in wet conditions.
Steps for preparing the riveter by threading and adjusting the rivet nut.
Procedure for removing and replacing the mandrel and associated parts.
Ensure the riveter and nuts are stored out of reach of children in a secure, dry place.
Recycle unwanted materials and dispose of fluids according to local regulations.
To Next Page
General
