EasyManua.ls Logo

Bluetti AC300 - Page 44

Bluetti AC300
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12.2 Enable the UPS
12.2.1 Standard UPS Mode
AC300+B300 plays as a backup power source when the grid presents, immediately
charging your loads when the grid fails.
12.2.2 Time Control UPS Mode
AC300+B300 charges and discharges at specific time periods, greatly cutting your
electricity bills.
Charge Time: The period when AC300+B300 charges via the grid. Choose to
charge the system during off-peak hours when electricity prices are low.
Discharge Time: The period when AC300+B300 supplies power to your loads.
Parameter Setting:
Battery SOC Low: When the remaining battery capacity is lower than preset
charge value, the load will be powered by the grid in bypass mode. Setting it at 0
may cause the failure of bypass function.
Battery SOC High: When reaching the preset charge value,
AC300 will be recharged via PV instead of the grid.
39
JUST POWER ON

Other manuals for Bluetti AC300

Related product manuals