5.2 Solar Panel(s)
Connect the solar panel(s) to B210P via the solar charging cable. With a continuous
input of 500W, B210P will automatically stop charging in 4.5-5 hours. However, please
note that the charging time may vary based on weather conditions, sunlight intensity,
panel orientation, and other variables.
Note: Make sure your solar panel(s) meet the following requirements:
Voc: 11V-60V Current: 10A Max. Power: 500W Max.
5.3 Car Outlet
Connect the B210P to the vehicle's 12V cigarette lighter port via the car charging cable.
The B210P also automatically stops charging when it's fully charged.
Note: Make sure your vehicle meets the following conditions for charging:
• The vehicle is capable of supplying power.
• The vehicle's engine is running during the charging process.
• If you unplug the solar charging cable from the B210P and you're not using any DC
outputs, the B210P will automatically shut down after about 4 hours.
For solar panel(s) with an open circuit voltage between 60V and 145V, you can still use
them to charge the B210P. Simply connect the solar panel(s) to the B210P via the PV
Voltage Regulator, and you can enjoy seamless and hassle-f ree solar charging.
Notice：
JUST POWER ON 13
EN
To Next Page
Loading...
