• Keep people other than the installation technicians away from the energy storage
system.
• When handling equipment and accessories, pack them in their original packaging
or other materials to protect them from impact.
• Seal all the wiring ports with fireproof and water-proof materials to prevent
possible electric shock or other risks.
• It’s prohibited to alter, damage or cover the marking and nameplate of any part of
the system.
• Check and make sure all safe guards, including screws and waterproof rings, are in
place and properly tightened.
• Keep the system firmly secured to the ground or other solid objects, such as a wall
or mounting bracket.
• Use a non-abrasive cloth to clean the equipment and accessories. Do not use water
or harsh chemicals.
• Please follow the instructions in the user manual to install the EP900 energy
storage system.
1.2.1 Personnel Requirements
The installation, commissioning, and maintenance should only be performed by
qualified professionals or trained personnel.
• Personnel who plan to install, commission, or maintain the EP900 energy system
should receive rigorous training in all necessary safety precautions and proper
operating practices.
• Professional personnel: personnel who has skills and knowledge related to the
installation and operation of electrical equipment, and has received safety training
to recognize and avoid or minimize the hazards to themselves and other people.
1.2.2 Anti-static Requirements
•
Wear or use personal protective equipment (PPE) or clothing that is appropriate for
the work; this may include items such as safety glasses or goggles, or a face shield
(with safety glasses or goggles), hearing protection, dust mask, gloves, anti-static
bracelet, safety boots or shoes, or rubber boots.
• If you use an anti-static bracelet for electrical connections, make sure the bracelet
is properly grounded.
JUST POWER ON12
To Next Page
Loading...
