1.4 Transportation
All components of the EP900 energy storage system leave the factory in optimum
electrical and mechanical state. It's necessary to use original or appropriate packag-
ing to ensure the product safety during transportation. When you receive the
product, inspect for any kind of damage and note the damage on the delivery
receipt. The shipping company will be responsible for any damage or loss of the
product during transportation. If necessary, please contact us for further assistance.
• The symbols on the box contains important information for safe operation.
• The nameplate on the side of the box contains important parameter information
related to the product.
1.6 Storage
•
When not using the system for extended periods of time, power it off and remove
all electrical connections.
• Charge the system to 50%-70% SOC before storage.
• In order to keep the battery healthy, fully charge and discharge the system every six
months.
• Make sure the place where to store the system is well ventilated and spacious.
• Do not store the system with flammable liquids, gases, or explosive materials.
• You’re strongly recommended to clean the surface frequently with a dry soft cloth.
• Keep away from children and pet.
• Do not stack anything on top of the equipment either in storage or in use.
• Avoid exposing the equipment to rain, humidity or direct sunlight.
• For details of storage temperature, please refer to chapter 8-Specifications.
1.5 Packaging Handling
JUST POWER ON16
To Next Page
Loading...
