3. EP900 Inverter
EP900 inverter is anenergy storage photovoltaic grid-connected inverter that can
handle photovoltaic input, grid-connected charging, and discharging. It is an
important part of the energy storage system.
Features
Take advantage of solar energy: Triple MPPT charge controllers to maximize solar
input, while store solar energy in LiFePO4 batteries. It also works with the grid-con-
nected PV system.
Smart energy storage solution: Intelligent user application mode, which can
automatically control the flow of system charging and discharging power or
according the user demand to adjust the energy actively.
Uninterruptible power supply (UPS): It takes less than 10ms to switch from off
on-grid connection to off grid.
Battery expansion: The ESS supports 2-4 battery packs (B500) to expand the total capacity.
App control & monitor: With WiFi or Bluetooth connection, you can check the
system operation anytime and anywhere.
IP65 water-resistant: The ESS is not subject to dust and water splashes from all
directions, making it suitable for indoor and outdoor use. If you place the system
outside the house, use a cabinet to protect it from direct sunlight.
3.1 Supported Grid Form
The EP900 grid-connected inverter supports low-voltage power grid. The grid form
is L1/L2/N, as shown in the following figure.
Figure 3-1
240/120 split phase 240 delta
JUST POWER ON
21
To Next Page
Loading...
