Need help?Do you have a question about the Bluetti EP800 and is the answer not in the manual?
Covers essential safety information, general requirements, personnel qualifications, and installation safety procedures.
Details battery safety, installation, handling, fire emergency measures, and disposal procedures.
Outlines electrical safety, grounding, wiring, maintenance, transportation, storage, and label descriptions.
Introduces the EP800 system, its integrated functions, and lists key components.
Describes the Self-consumption, Backup, Time of Use, and Custom operating modes of the EP800.
Details the EP800 inverter's purpose, appearance, and physical dimensions.
Describes all physical interfaces, wiring instructions, USB, DRMs, and link ports.
Explains LED indicators, buzzer alarms, and inverter cable types for system monitoring and connectivity.
Provides an overview of the B500 battery, its capacity, BMS, and physical characteristics.
Details B500 interfaces, wiring instructions, and connection methods for multiple units.
Explains B500 LED indicators and the types of cables used for battery expansion and communication.
Explains the communication methods (WiFi/Bluetooth) and provides an overview of the IoT controller's functions.
Covers safety instructions for the IoT controller and steps for connecting it to the EP800 system.
Outlines the overall sequence of steps for installing the EP800 energy storage system.
Details packing lists for EP800, B500, base, and lists all required tools for installation.
Specifies requirements for the installation environment, location, space, and stacking units.
Provides step-by-step instructions for mounting and installing the IoT controller on a wall.
Details electrical connections including grounding, battery power, communication, PV, and grid/backup cables.
Lists essential checks to perform before the initial use of the EP800 system.
Step-by-step instructions for powering up (commissioning) and shutting down (decommissioning) the system.
Guides on how to perform firmware upgrades for the EP800 system using USB or OTA methods.
Instructions for removing the inverter and guidelines for the safe and proper disposal of battery packs.
Details specifications for the AC input and output ports, including voltage, current, and power ratings.
Details specifications for the DC input (PV) and battery ports, including voltage, current, and power limits.
Covers environmental conditions, dimensions, weight, communication methods, and warranty information.
Provides a comprehensive list of error codes and corresponding troubleshooting steps for resolving system issues.
Addresses common user queries regarding system operation, connectivity, charging, and troubleshooting.
Information regarding FCC compliance, potential interference, and RF exposure limits.
Details compliance with Industry Canada (IC) regulations for radio frequency emissions and device operation.
To Next Page
General
