Bluetti EP800 - IoT Controller Setup; Communication Principle and Overview

5. IoT Controller
5.1 Communication Principle
The IoT controller supports WiFi and Bluetooth dual-mode communication,
allowing connectivity between the EP800 and BLUETTI App. Everything about the
system, including power generation and consumption, alarms, and operating
status, can be uploaded to the BLUETTI server via the WiFi network. By registering
the EP800 with your BLUETTI App, you’re able to monitor and control this unparal-
leled power plant anytime and anywhere.
Table 5-1
Communication
WiFi
Bluetooth
Standard
Standard
Note
5.2 Overview
1.Menu Button.
To factory reset the controller,
press and hold this button for
about 5s till all LED indicators flash.
2. WiFi Indicator.
Flash till the controller
connected to WiFi.
3. Bluetooth Indicator.
Flash till the controller
connected to Bluetooth.
4.Reboot Button.
Press to reboot the controller.
1
2
3
4
JUST POWER ON32