2.2 Working mode
The EP800 offers three operating modes to accommodate various energy plans.
You can choose the one that best suits your home power supply configuration.
• Self-consumption
In this mode, the EP800 prioritizes the direct consumption of solar energy to meet
immediate household energy needs. Any surplus solar energy generated during the
day is intelligently stored in the battery for usage during peak hours or in the event
of a power outage. With such a strategy, the EP800 ensures an efficient and reliable
power supply, reducing reliance on the grid and promoting energy independence.
Table 2-1
Component Description
EP800
Inverter
Anenergy storage photovoltaic grid-con-
nected inverter to handle photovoltaic input,
grid-connected charging, and discharging.
Please refer to Chapter 3.
EP800 Home Energy Storage
Inverter for details.
Please refer to Chapter 4. B500
Battery for details.
Please refer to Chapter 5.
IoT Controller for details.
Please refer to EP800 Home
Energy Storage System BLUETTI
App User Manual for details.
Please purchase it
separately and contact
BLUETTI support before
making the purchase.
B500 Battery
LiFePO
4
battery pack, used to store
energy and power the EP800.
IoT Controller
A component to facilitate seamless near-end
communication (Bluetooth) or remote
communication (WiFi) with EP800 inverter.
BLUETTI App
An application to monitor and control the
EP800.
Rapid
Shutdown
A component to disconnect the DC input
from the solar system.
A component to disconnect the AC input
from the grid.
Sub Panel
A component that essential loads connect to.
Automatically switches to EP800 to power
essential loads during a power outage.
Manually switches to the grid for load power
in case of an EP800 malfunction.
Note
JUST POWER ON
19
To Next Page
Loading...
