Bluetti EP800 - System Disposal; Inverter Removal and Battery Recycling

JUST POWER ON64
9. System Disposal
9.1 Remove the Inverter
When the inverter is no longer in use, it must be disposed of properly.
Step 1: Power off the system.
Step 2: Disassemble all electrical connections to the inverter, such as signal cable,
DC input cable, power cable, AC input cable, grounding cable, etc.
Step 3: Remove the inverter and related parts.
9.2 Recycle the Inverter and Battery Pack
When the battery pack reaches the end of its lifespan,itmust be safely and carefully
disposedofby the provisions of local laws andregulations.
Please contact our company for further assistance if the battery pack is
a.Leaked or damaged.
b.Out of warranty or severely degraded in performance.
c.To be replaced or not intended for further use.