Operation
Danger
Do not touch live parts and cables when EP900 energy storage
system is running, as it may result in death or lethal injuries due to
electric shock.
Do not touch the equipment, as the shell may become hot when
it’s running.
Attention
Handle the equipment and accessories with care during loading,
unloading and transportation.
Danger
Prior to servicing and maintenance, disconnect the power grid,
battery and PV system. Wait at least 5 minutes until the internal
equipment is discharged.
Attention
Please follow the anti-static requirement to avoid electrical shock
and other risks.
If any maintenance is required, please contact the local authorized
service center.
Place temporary warning signs or erect fences to prevent
unauthorized access to the maintenance site.
Service and maintenance
Danger
High voltage generated by the equipment during operation may
cause an electric shock, which could result in death, severe injury, or
property damage. Please follow the safety instructions in the user
manual and relevant electrical safety codes.
JUST POWER ON14
To Next Page
Loading...
