Please make sure use the system within specific
temperature range. If the symptom persists,
please contact the BLUETTI support team.
Check the PV setup for proper working
condition. Solar panels may get a low voltage
under improper working conditions.
If it occurs occasionally, the grid may go
through abnormal working conditions. The
inverter recovers after the grid resumes.
If it occurs many times, check if the grid voltage
and frequency support the inverter input
specifications. Check the inverter AC circuit
breaker and connections. If the voltage and
frequency are beyond the range, please contact
the BLUETTI support team.
Check the details on BLUETTI app.
Please reconfigure the settings on
BLUETTI app. If the symptom persists,
please contact the BLUETTI support team.
129.
EEPROM Read and
Write Anomaly
JUST POWER ON 33
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.-96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.-128.
Reserved
Operating Ambient Temperature Anomaly
Temperature 1 Anomaly
Temperature 2 Anomaly
Temperature 3 Anomaly
Temperature 4 Anomaly
BMS Charge Protection
BMS Discharge Protection
BMS System Failure
Reserved
Grid Voltage High
Grid Voltage Low
Grid Over Frequency
Grid Low Frequency
Reserved
Grid Loss
PV1 Voltage Low
PV2 Voltage Low
Reserved
DSP_Debug CAN Communication Failure
DSP_Debug RS485 Communication Failure
Reserved
Reserved130.-133.
To Next Page
Loading...
