EN
25
Weight 700 g
Material HDPE plastic
Marking
Model 004653-57
Reinforced durability S
Approved in accordance with
the relevant directives. CE
EAR PROTECTION
Marking 004508-09-01 EN352-3
Weight 234 g
Sizes and adjustments S, M, L
Material
Cup arms POM
Cups POM
Sealing rings PVC
Marking
Model 004508-09-01
Attenuation value SNR= 23 dB
European standard EN352-3
NOTE:
The seals are not sold as a spare part; seals
are not replaceable.
VISOR
Marking 004508-09-2 EN 1731 S CE
Weight 124 g
Temperature range –5 to +55°C
Marking
Model 004508-09-2
European standard EN 1731
Safety class S
Approved in accordance with the relevant
directives. CE
Protection capacity
The mesh visor is intended as mechanical
protection from eye and face injuries. The
forehead protection is marked with a number
and letter code to indicate manufacturer,
applications, safely level and properties.
NOTE:
There are no spare parts.
WARNING!
• S rated visors do not provide protection
from hard or sharp particles at high
velocity.
• If the markings S, F, B or A do not
corresponds to the information in the
instructions, or are not the same as the
safety glasses, the equipment shall be
considered to have the lowest safety
rating.
DESCRIPTION
1. Helmet
2. Visor (with holder)
3. Ear protection
4. Regulator for neck strap
5. Regulator for ear protection
6. Neck strap
FIG. 1
PACKAGE CONTENTS
1. Helmet with adjustable neck strap and
sweat band (004653-57 red or orange).
2. Ear protectors (004508-09-1).
3. Visor (with holder) (004508-09-2).
4. Instructions
To Next Page
Loading...