24
Maintenance
1. Maintenance
Caution!
Remove the drilling head
from the machine for main-
tenance.
• Clean drilling head of bore dust reg-
ularly
• Check if drilling head is functioning
properly. Replace any damaged parts
with genuine spare ones immediately
• Replace blunt drill bits with sharp
ones
Caution
Replace broken or damaged
parts immediately!
Use only genuine spare
parts made by Blum!
2. Replacing damaged coupling
• Remove damaged coupling with a
blunt screwdriver
• Push spare coupling (G1) onto shaft
until it is flush with top of shaft
Maintenance
G
To Next Page
Loading...