54
EN
4. Charging the battery
The lawn mower comes with one or two uncharged batteries. Once you have
connected the charging station, you can charge the lawnmower‘s battery while
laying the perimeter wire.
5. Installing the Boundary Wire
• If you wish to change the boundary wire course in the near future, it is
recommended that the perimeter wire be xed to the ground. Water the
area beforehand to make it easier to insert the xings into the ground.
• You can also bury the perimeter wire or combine both methods.
• Place the perimeter wire in an arc around the area to be mowed by the
lawnmower. It is easiest to start at one end of the charging station and lay
the perimeter wire in an arc towards the other end of the charging station.
start from here OR start from here
To Next Page
Loading...
Need help?
General
