55
EN
• The boundary wire should be xed/buried at a minimum distance of 40cm
from corners, obstructions, fences, etc. This prevents the mower from
colliding with obstacles and reduces wear.
• If the lawn is divided into several working areas, care must be taken to
ensure that the width of each working area exceeds 1.2 metres, otherwise
the mower will have difculty moving in that area.
• Do not x/bury the boundary wire at an acute or right angle but in bends
of at least 50 cm.
sharp angle
right angle
cross
obtuse angle arc angle
To Next Page
Loading...
