Blumfeldt 10034749 User Manual

57
EN
• Use a hammer to x the pins in the ground. Be careful when hammering
and make sure the boundary wire is at along the oor. The distance
between each pin should be 100 cm. At the corners, the distance between
the pins should be approx. 30 - 50 cm.
• Ensure that the boundary wire does not wind up.
• If you want to bury the boundary wire, be sure to bury it 1 - 15 cm into the
ground. The perimeter wire should not wind up under the ground.

Blumfeldt 10034749 Specifications

General

Brand	Blumfeldt
Model	10034749
Category	Lawn Mower
Language	English