75
EN
Test startpoint
You can test whether the lawnmower can reach the starting point you have
set. Press „Home screen“ > „Diagnostics“ > „Test startpoints“ (point 1 - point 3).
You can check that the lawnmower starts at the correct location.
Note: Perform this test when the lawnmower is in the charging station.
1 Select the starting point you want to test and press the OK button.
2 Select „Yes“ and press the OK button.
3 Close the control panel cover.
The lawnmower will then start testing the starting point you have selected.
Once the test is complete, the mower stops and you can check that the values
you set are correct.
To Next Page
Loading...
