USER’S MANUAL
30
4.2. Picture Settings
Press the MENU key, Channel menu shows on the screen. Press / key
to select PICTURE. Press / key to select item you´d like to adjust or set.
Press OK key to enter into Picture Mode submenu.
After selecting Picture mode, press OK key to enter into submenu. Press
/ key to select item you´d like to adjust or set.
Picture Mode: Select picture mode between Standard, Soft, User
and Dynamic.
Contrast: Adjust the contrast of whole picture; increasing analog
value increases contrast, decreasing analog value decreases contrast
(0-100).
Brightness: Adjust the brightness and blackness of whole picture;
increasing analog value increases brightness, decreasing analog value
decreases brightness (0-100).
Color: Adjust the color of whole picture; increasing analog value
increases color temperature, decreasing analog value decreases color
temperature (0-100).
To Next Page
Loading...