AMF42AU QUICK REFERENCE GUIDE
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
AMF42AU
Quick Reference Guide
01
Our AMF42AU is an advanced 4K 4x2 multi-format presentation switcher featuring
3 x HDMI and 1 x USB-C input to 2 x HDMI / 1 x HDBaseT™ output. The AMF42AU
provides enhanced features including seamless switching, independent video
scaling on outputs, MIC input with phantom power, audio mixing and PoC to
power a Blustream compatible HDBaseT™ receiver. The AMF42AU also features
a Web GUI for control and configuration, source and display control via: RS-232,
CEC, manual or automated source selection, IR pass-through and control via front
panel, IR, RS-232 and TCP/IP. The AMF42AU is an ideal product for your boardroom,
classroom or lecture theatre.
Introduction
FEATURES:
• Features 3 x HDMI and 1x USB-C inputs which can be independently routed to 2 x HDMI / HDBaseT™ outputs
• Seamless source switching with manual or auto source selection
• Independent video scaling on dual outputs
• Supports HDMI 2.0 18Gbps specification
• Supports resolutions up to 4K UHD 60Hz 4:4:4
• Dual HDMI / HDBaseT™ on output 2. HDBaseT™ output supports distribution of video sources up to 70m 1080p (4K
60Hz 4:4:4 up to 40m) to the Blustream RX70CS receiver
• Supports USB Type C up to 4K UHD 60Hz 4:4:4, DP1.2 with 40W charging capability
• Audio breakout to analogue L/R audio and Toslink (S/PDIF) digital outputs concurrently
• Audio mixing capabilities with independent level adjustment
• Analogue audio inputs support both balanced and unbalanced audio
• MIC input supports line level or 48V phantom power
• Configurable source and display control via RS-232, IR and CEC
• Web interface module for control and configuration of matrix
• Control via TCP/IP, RS-232, IR and front panel
• Open control API (IP / RS-232) for integration with 3rd party control platforms
• HDCP 2.2 compliant with advanced EDID management
To Next Page
Need help?
General
