Need help?Do you have a question about the BluStream MFP72 and is the answer not in the manual?
Details the key features including switching modes, scaling, audio embedding, and control options.
LCD display and LEDs showing status, mode, and power.
Using DIP switches on the rear panel for EDID configuration.
Using front panel buttons to configure EDID settings.
Details the pin assignments for RS-232 communication.
Lists available commands for system control and configuration.
Specifies baud rate, data bits, parity, and stop bit for RS-232.
Details the key features including switching modes, scaling, audio embedding, and control options.
LCD display and LEDs showing status, mode, and power.
Using DIP switches on the rear panel for EDID configuration.
Using front panel buttons to configure EDID settings.
Details the pin assignments for RS-232 communication.
Lists available commands for system control and configuration.
Specifies baud rate, data bits, parity, and stop bit for RS-232.
To Next Page
General
