BMC G2S B20A

G2S BPAP Series User Manual V2.1
23 / 43
WARNING!
• Do not touch the heater plate of the device when it is working, otherwise you may get
burned. Turn off the heat when the heated humidifier is not in use.
14. Navigating the Patient Menu
14.1 Steps to Navigate the Patient Menu
14.1.1 Accessing the Main Interface
Connect the power cord and power adapter properly. The screen displays the Main Interface
shown in Fig. 14-1, or the Main Interface shown in Fig. 14-2, or the Main Interface shown in
Fig. 14-3, or the Main Interface shown in Fig. 14-4.
Fig. 14-1
Note: The above interface only applies to G2S B20S and G2S B20A.
Fig. 14-2
Note: The above interface only applies to G2S B20T.
Fig. 14-3
Note: The above interface only applies to G2S B25A and G2S B25S.