BMC G2S BPAP Series User Manual

G2S BPAP Series User Manual V2.1
15 / 43
IMPORTANT TIPS!
• After interruption and restoration of the power supply, the device will restore its
pre-interruption working status automatically.
• To remove AC power, disconnect the power cord from the power outlet.
11.4 Connecting to Power Cord Locker
(1) Assemble the power cord locker to the device directed by the positioning groove.
Fig. 11-4
(2) Open the power cord locker, plug the power cord to the power supply, and press the
locker downward to fix the power cord into the power port.
Fig. 11-5
The function of the locker is to prevent the power cord falling off from the power port.
11.5 Assembling the Tube and Mask
(1) Connect one end of the tube to the air outlet of the main device, as shown in Fig. 11-6.

BMC G2S BPAP Series Specifications

General

Brand	BMC
Model	G2S BPAP Series
Category	Medical Equipment
Language	English