Cable Housing Replacement
and Seatpost Installation
Allen Keys
Cable Cutter
Grease
Silicon Lube
Cable grease
6.1 Tools required
Shifter Cable & Cable housing
Temps Required
10 minutes
6.2 Cable Housing Replacement and Seatpost Installation
1. Remove now the shock along with the
cover located beneath it and place them
next to the frame. It’s not necessary to
remove the shock lockout remote cable.
Before starting this operation procced to remove the RAD seatpost as shown in the dedicated chapter
and section of the tutorial video, remove the old cable housing.
16
To Next Page
Loading...
