Need help?Do you have a question about the BMC Timemachine and is the answer not in the manual?
General| Brand | BMC |
|---|---|
| Model | Timemachine |
| Category | Bicycle Accessories |
| Language | English |
Important safety warnings regarding mechanical operation and potential injury or death.
Guidelines for measuring stack (SP/SS) and reach (RP/RS) for optimal bike fit.
Calculating SSnew and RSnew values to select the correct frame size and stem.
Using SSB and SH values to determine the correct seat post hardware mounting location.
Visual guide to the main components of the BMC Timemachine frameset with page references.
List of essential tools required for assembling the BMC Timemachine bicycle.
A step-by-step guide outlining the recommended order for building the Timemachine.
Initial steps for preparing the frameset, including Di2 specific parts and checks.
Details on the special cover for Di2 groupsets and FD cable stopper for mechanical groupsets.
Step-by-step instructions and part numbers for assembling the front and rear brake arms.
Detailed instructions on how to route the front brake cable through the handlebars and fork.
Guide on how to correctly install the pipe for the front brake cable.
Instructions for routing the rear brake cable through the frame and handlebars.
How to properly tension the front brake cable and check lever function.
Instructions for tensioning and securing the rear brake cable.
How to adjust brake pad reach using spacers for different rim dimensions.
Guidance for installing Di2 cables within the Timemachine frame.
Step-by-step instructions for routing Di2 wires through the frame and connecting components.
Information on cleanly integrating Di2 wires into the specific Timemachine handlebars.
Overview of compatibility with mechanical and electronic shifting groupsets.
Instructions for routing mechanical shifting cables using full housing.
Identification and part numbers for all components of the hingefork and headset.
Detailed steps for greasing, installing bearings, crown races, and fork.
List and part numbers for all components of the P2p stem system.
Step-by-step guide for assembling the P2p stem system onto the fork.
Identification and part numbers for the seat post clamp kit components.
Instructions for greasing and installing the seat clamp unit into the frame.
Guidelines on how to properly wash the Timemachine without damaging components.
Solutions for common problems like noise, play, or improper function.
To Next Page
