General Note
Important Notice
Every maintenance operation not expressly listed on this document should be
performed by BMC or by a BMC service center not to void warranty.
Operating Pressure:
-Max 3 Bars/Psi
-Recommended 2 Bars/Psi
Torque settings:
-Seatpost clamp: 4 Nm
-Cable pinch bolt: 2Nm
-Remote lever: follow marking on collar/lever
Cable type:
-Standard shifter cable 1.1/1.2mm
Saddle rail compatibility:
-Round or 7mm (height) for oval Carbon rails
Basic Maintenance:
Dust Wiper Cleaning:
-25 Hrs.
Seatpost Shaft Cleaning:
-50 Hrs.
2
To Next Page
Loading...
