Section 2: Heater Safety
The Installation of this appliance must be done by a registered installer/contractor
suitably qualified in the installation and service of gas fired heating equipment.
WARNING!
Improper installation, adjustment, alteration, service or maintenance can
result in death, injury or property damage. Read the installation, operation
and service manual thoroughly before installing or servicing this appliance.
Note:
To Installer: Please take the time to read and understand theses instructions prior
to any work servicing or installing this appliance.
Installers must leave a copy of this manual with the end user/owner.
To Owner: This manual must be kept in a safe place in order to provide necessary
information for service engineers at a later date.
Section 3: Installers Responsibilities
♦ To install the heater, as well as the gas and electrical supplies, in
accordance with applicable specifications and codes. BMM Heaters
recommends the installer contact a local Building Inspector, Fire Officer or
Insurance Company for guidance.
♦ To use the information given in the manual together with the local and
national codes to perform the installation.
♦ To install the heater in accordance with the Clearances to Combustibles of
this heater.
♦ To plan for the installation of supports, flues and air intakes.
♦ To provide access to burners for servicing.
♦ To provide the owner with a copy of this installation, commissioning,
operation and service manual.
♦ To never use heater as support for ladder.
♦ To ensure that there is sufficient ventilation in the area to comply with the
requirements of all relevant local and national codes.
5
To Next Page
Loading...