G650 Continued..
• Start the engine of the vehicle with the discharged battery in the usual way; if the
engine does not start, wait a few minutes before repeating the attempt in order to
protect the starter motor and the donor battery.
• Disconnect jump leads first from the negative terminal, then from the positive
terminal. Replace cover 1 of the positive battery terminal. Position small heat shield 3
with aluminium side out and secure with rubber strap. Fold large heat shield on the
battery.
• Install the centre trim panel and Install seat.
• No keyless start function available on this model
F700/800
• Remove seat using ignition key
To Next Page
Loading...
