Destination guidance
124
Destination guidance
Starting destination
guidance
Control Center, for principle details, refer to
page 16.
1. Select "Navigation" and press the control-
ler.
2. Select the destination from the destination
list and press the controller or enter a new
destination, refer to page 115.
3. Select "Start guidance" and press the con-
troller.
The destination guidance is started.
This symbol marks the current destination.
After the route has been calculated, destination
guidance is indicated by arrows or a route map
on the Control Display.
1 Estimated time of arrival
2 Distance to the destination on the calcu-
lated route
3 Route criterion
4 Switch voice instructions on/off
During destination guidance, you can operate
other equipment using the Control Center at
any time. You are notified well in advance of a
necessary change of direction by spoken
instructions and the display of the direction
arrows.
To exit from the menu:
Select the arrow and press the controller.
To Next Page
Loading...
Need help?
General
