Controls
75
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Computer
Select "Onboard info" and press the controller.
> Estimated time of arrival at destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
*
, refer to page 115.
> Cruising range
> Distance to destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
*
, refer to page 115.
> Average speed
> Average fuel consumption
Trip computer
Select "Trip computer" and press the control-
ler.
> Departure time
> Driving time
> Distance traveled
> Average speed
> Average fuel consumption
Start or stop trip computer, or reset all values:
1. Select "Set" and press the controller.
2. Select the desired menu item.
3. Press the controller.
Entering a distance manually
Control Center, for principle details, refer to
page 16.
1. Open "Navigation".
On vehicles without navigation system:
Open "Car Data".
2. Select "Car Data" and press the controller.
3. Select "Onboard info" and press the con-
troller.
4. Select "Distance to dest." and press the
controller.
5. Turn the controller to select the distance
to your destination. If necessary, hold it
against a slight resistance to enter a greater
difference.
6. Press the controller to apply the setting.
The distance is automatically predetermined
during the destination guidance of the naviga-
tion system
*
.
Display options
You can display the computer or the trip com-
puter in the assistance window.
Control Center, for principle details, refer to
page 16.
To Next Page
Loading...
Need help?
General
