Adjusting the distance
▷ Back: press the button and slide the head re‐
straint towards the rear.
▷ Forward: pull the head restraint forwards.
After adjusting the distance, make sure that the
head restraint engages correctly.
Adjusting the distance: M sport
seat
The distance from the back of the head is adjus‐
ted by the seat backrest angle.
Adjust the distance so that the head restraint is
as close as possible to the back of the head.
Removing
Only remove the head restraint if no-one is in‐
tending to sit in the seat in question.
1.
Push the head restraint up until resistance is
felt.
2. Press the button, arrow 1, and pull the head
restraint fully out.
Removing: M sport seat
The head restraints cannot be removed.
Installing
Proceed in the reverse order to install the head
restraint.
Rear head restraints
Safety notes
WARNING
If the head restraints are removed or incorrectly
adjusted, they cannot provide protection as in‐
tended and head and neck injuries may result.
There is a risk of injury.
▷ Before a journey, re-install any removed
head restraints on all occupied seats.
▷ Adjust the head restraint so that its centre
supports the back of the head at eye level
where possible.
▷ Adjust the distance so that the head re‐
straint is as close as possible to the back
of the head. If necessary, adjust the dis‐
tance by adjusting the backrest angle.
WARNING
Parts of the body can become trapped when
the head restraints are moved. There is a risk of
injury. When moving the head restraint, make
sure that the area of movement is kept clear.
WARNING
Objects on the head restraint impair the protec‐
tive function of the head restraint in the head
and neck area. There is a risk of injury.
▷ Do not fit any covers on the seats or head
restraints.
Seite 129
Seats, mirrors and steering wheel
CONTROLS
129
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
