▷ Do not hang objects such as coat hangers
directly on the head restraint.
▷ Only use accessories that have been clas‐
sified as safe for attaching to the head re‐
straint.
▷ Do not use any accessories, for example
cushions, during the journey.
Folding down the head restraints
Head restraints can be folded back to improve
rear visibility. Only fold back the head restraint if
no one is sitting on the seat in question.
▷ Backward: press the button, arrow 1, and fold
back the head restraint.
▷ Forwards: fold the head restraint forwards as
far as it will go. Ensure that the head restraint
engages correctly.
Adjusting the height
The outer head restraints can be adjusted in
height.
▷ Down: press the button, arrow 1, and slide
the head restraint downwards.
▷ Up: push the head restraint upwards.
After adjusting the height, make sure that the
head restraint engages correctly.
Removing the outer head
restraint
Only remove the head restraint if no-one is in‐
tending to sit in the seat in question.
1. Fold down the corresponding rear seat back‐
rest.
Expand the luggage compartment, see
page 331.
2. Push the head restraint up until resistance is
felt.
3. Insert the integrated key.
Integrated key, see page 102.
4. Press and hold the integrated key and the
button simultaneously, arrows 1, and pull the
head restraint fully out.
Seite 130
CONTROLS
Seats, mirrors and steering wheel
130
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
