Removing the middle head
restraint
Only remove the head restraint if no one is sitting
on the middle seat.
1. Push the head restraint up until resistance is
felt.
2. Press the buttons, arrows 1, and pull the
head restraint fully out.
Installing
To install, insert the head restraint into the mount
and push down until resistance is felt.
After installation, make sure that the head re‐
straint engages correctly.
Exterior mirror
General
The mirror setting is saved for the current driver
profile. If a driver profile is selected, the saved
position is retrieved automatically.
The current exterior mirror position can be saved
with the memory function.
Safety note
WARNING
Objects reflected in the mirror are closer than
they appear. The distance to road users behind
the vehicle could be incorrectly estimated, for
example when changing lane. There is a risk of
accident. Look over your shoulder to estimate
the distance from following traffic.
Overview
1 To adjust
2 To select a mirror, automatic parking function
3 To fold in and out
Electrical adjustment
Press the button.
The selected mirror moves in response to
the button movement.
Selecting a mirror
To switch to the other mirror:
Push the switch.
Malfunction
In the event of an electrical fault, press the edges
of the mirror glass to adjust the mirror.
Folding in and out
NOTE
Because of its width, the vehicle could sustain
damage in car washes. There is a risk of mate‐
rial damage. Before washing, fold the mirrors in
manually or with the button.
Seite 131
Seats, mirrors and steering wheel
CONTROLS
131
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
