Activating
Press the lever upwards once from the home po‐
sition, arrow 1.
Wiping is started.
The LED in the wiper lever is illuminated.
If there is frost, wiping may not start.
Deactivating
Press the lever back to the home position.
Setting the sensitivity of the rain
sensor
Turn the knurled wheel to set the sensitivity of
the rain sensor.
Upwards: high sensitivity of the rain sensor.
Downwards: low sensitivity of the rain sensor.
Windscreen washer
Safety notes
WARNING
At low temperatures, the washer fluid can
freeze onto the windscreen and restrict visibil‐
ity. There is a risk of accident. Only use the
washer systems if there is no possibility of the
washer fluid freezing. Use antifreeze if required.
NOTE
If the washer fluid reservoir is empty, the
washer pump cannot operate as intended.
There is a risk of material damage. Do not use
the washer system with the washer fluid reser‐
voir empty.
Cleaning the windscreen
Pull the lever.
Washer fluid is sprayed onto the windscreen di‐
rectly in front of the wiper blade as the wipers
move up.
Seite 163
Driving
CONTROLS
163
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
