Configuring the journey data
display
The intervals for displaying the journey data in
the instrument cluster and on the Control Display
can be configured.
1. "CAR"
2. "Driving information"
3. "Journey data"
4. "Values since"
5. Select the desired setting:
▷ "Start of journey ( )": the values are reset
automatically if the vehicle is at a standstill
for approximately four hours.
▷ "Refuel ( )": the values are reset automati‐
cally after refuelling with a significant
amount of fuel.
▷ "Charging ( )": the values are automatically
reset after charging.
▷ "Ex works": Average consumption
since leaving the factory.
The values since leaving the factory are
displayed.
▷ "Individual ( )": the values since the last
manual reset are displayed. The values
can be reset at any time.
Resetting average values
manually
The following interval can be reset manually at
any time: "Individual ( )".
Via the button on the turn indicator lever:
1. Press the button on the turn indicator lever
repeatedly until the widget for the journey
data is selected.
2. Press and hold the button on the turn indica‐
tor lever.
Via iDrive:
1.
"CAR"
2. "Driving information"
3. "Journey data"
4. "Values since"
5. "Reset individual"
The average values and counters are reset.
Once the average values and counters have
been reset, the following interval is automatically
set: "Individual ( )".
Sport displays
Principle
The sport displays primarily assist a sporty driv‐
ing style.
Display on the control display
Overview
The following information is displayed:
▷ Charging pressure.
▷ Engine oil temperature.
▷ G meter.
Seite 195
Displays
CONTROLS
195
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
