Button Status
Button illuminates green: all Intelligent
Safety Systems are switched on.
Button illuminates orange: some Intel‐
ligent Safety Systems are switched
off or are currently not available.
Button does not illuminate: all Intelli‐
gent Safety Systems are switched off.
Setting the warning time
1. "CAR"
2. "Settings"
3. "Driver assistance"
4. "Safety and warnings"
5. "Lane change warning"
6. Select the desired setting:
▷ "Early"
▷ "Medium"
▷ "Late"
▷ "Off": no warning is output for this setting.
The setting is saved for the current driver profile.
Adjusting the strength of the
steering wheel vibration
1.
"CAR"
2. "Settings"
3. "Driver assistance"
4. "Feedback via steering wheel"
5. "Vibration intensity"
6. Select the desired setting.
The setting is accepted for all Intelligent Safety
Systems and saved for the current driver profile.
Vehicles with side collision warning:
steering intervention on/off
Steering intervention can be separately switched
on and off for Lane Change Warning or Lane De‐
parture Warning.
1. "CAR"
2. "Settings"
3. "Driver assistance"
4. "Safety and warnings"
5. "Lane change warning"
6. "Steering intervention"
The setting is saved for the current driver profile.
Warning function
Light in the exterior mirror
Advance warning
The dimmed light in the exterior mirror indicates
when vehicles are in the blind spot or are ap‐
proaching from the rear.
Acute warning
If the turn indicator is activated while a vehicle is
in the critical area, the steering wheel vibrates
briefly and the light in the exterior mirror flashes
brightly.
The warning is terminated when the other vehi‐
cle has left the critical area or the turn signal has
been deactivated.
Seite 230
CONTROLS
Safety
230
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
