BMW 320e - Page 233

Switching on manually
Press the button.
The menu for the Intelligent Safety Sys‐
tems is shown.
If all Intelligent Safety Systems were switched
off, all systems are now switched on.
"Configure INDIVIDUAL": depending on the
equipment, the Intelligent Safety Systems can be
configured individually. The individual settings
are activated and saved for the current driver
profile. As soon as a setting is changed in the
menu, all settings in the menu are activated.
Press the button repeatedly.
The setting switches between the
following:
"ALL ON": all Intelligent Safety Systems are
switched on. Basic settings are activated for the
sub-functions.
"INDIVIDUAL": the Intelligent Safety Systems are
switched on according to the individual settings.
Some Intelligent Safety Systems cannot be
switched off individually.
Switching off manually
Press and hold the button.
All Intelligent Safety Systems are
switched off.
Button Status
Button illuminates green: all Intelligent
Safety Systems are switched on.
Button illuminates orange: some Intel‐
ligent Safety Systems are switched
off or are currently not available.
Button does not illuminate: all Intelli‐
gent Safety Systems are switched off.
Adjusting the strength of the
steering wheel vibration
1. "CAR"
2. "Settings"
3. "Driver assistance"
4. "Feedback via steering wheel"
5. "Vibration intensity"
6. Select the desired setting.
The setting is accepted for all Intelligent Safety
Systems and saved for the current driver profile.
Warning function
Light in the exterior mirror
Acute warning
In the event of imminent collision danger, the
light in the exterior mirror flashes and the steer‐
ing wheel starts vibrating.
A Check Control message is displayed at the
same time.
An active steering intervention may be executed
to avoid the collision and to keep the vehicle
safely within its lane.
Steering intervention can be felt at the steering
wheel, and can be overridden manually at any
time.
Seite 233
Safety
CONTROLS
233
Online Edition for Part no. 01405A1EA53 - X/20