Speed adjustment
Principle
It is possible to set whether the speed limit will
be accepted exactly, or with a tolerance.
General
It is possible to set a speed adjustment for all
speeds and an additional speed adjustment for
speeds up to 60 km/h/40 mph.
The additional speed adjustment for speeds up
to 60 km/h/40 mph can be activated or deactiva‐
ted.
Adjusting
1.
"CAR"
2. "Settings"
3. "Driver assistance"
4. If necessary, "Driving"
5. "Speed Assistant"
6. Perform the desired setting:
▷ "Adjust speed limits": set tolerance for
speed adjustment with an effect on all
speeds.
▷ "2nd adjustment up to": activate or deac‐
tivate additional speed adjustment.
▷ "Adjust speed limits": if additional speed
adjustment is activated, set a tolerance for
speeds up to 60 km/h/40 mph.
Adapting to the route
Principle
The system can be set so that it adapts the
speed automatically to the route.
For example, the speed is reduced in the
following situations if necessary:
▷ Before turning off.
▷ Before a roundabout.
▷ Before a bend.
Adjusting
1. "CAR"
2. "Settings"
3. "Driver assistance"
4. If necessary, "Driving"
5. "Speed Assistant"
6. "Adjust to route"
Traffic light detection
Principle
Speed Limit Assist controls the speed when the
vehicle approaches red traffic lights.
General
The camera near the interior mirror is used to
detect red traffic lights.
If necessary, the system also takes into account
information that has been saved in the navigation
system.
Detected red traffic lights are displayed in the in‐
strument cluster and, depending on the setting,
can be taken into account by Speed Limit Assist
either manually or automatically during the jour‐
ney.
Overview
Sensors
The system is controlled using the following sen‐
sors:
▷ Cameras behind the windscreen.
For further information:
Sensors of the vehicle, see page 47.
Operating requirements
▷ Active Cruise Control with Stop&Go function
ACC is activated.
▷ Speed up to approx. 80 km/h, approx.
50 mph.
Seite 266
CONTROLS
Driver Assistance Systems
266
Online Edition for Part no. 01405A1EA53 - X/20