EasyManua.ls Logo

BMW 320e - Page 279

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Overview
Button in the vehicle
Park Assistant button
Sensors
The system is controlled using the following sen‐
sors:
Ultrasonic sensors in the front/rear bumpers.
Depending on the equipment: side ultrasonic
sensors.
For further information:
Sensors of the vehicle, see page 47.
Switching on/off
Automatic activation
The system switches on automatically in the
following situations:
If selector lever position R is engaged while
the engine is running.
Depending on the equipment version: when
approaching detected obstacles, if the speed
is below approximately 4 km/h, 2.5 mph. The
distance from the obstacle at which the sys‐
tem activates depends on the individual sit‐
uation.
Automatic activation on detection of obstacles
can be enabled and disabled.
1.
"CAR"
2. "Settings"
3. "Driver assistance"
4. "Parking and manoeuvring"
5. If necessary, "Automatic PDC activation"
6. "Automatic PDC activation"
The setting is saved for the current driver profile.
Depending on the equipment version, a respec‐
tive camera view is switched on additionally.
Automatic deactivation when
moving forwards
The system switches off once a certain distance
or speed is exceeded.
Switch the system back on if necessary.
Switching on/off manually
Press the Park Assistant button.
On: the LED is illuminated.
Off: the LED is extinguished.
The image from the rear-view camera is shown
when reverse gear is engaged and the Park As‐
sistant button is pressed.
Depending on the equipment, the system cannot
be switched off manually when reverse gear is
engaged.
Warning
Acoustic signals
General
An intermittent sound indicates that the vehicle
is approaching an object. For instance, if an ob‐
ject is identified to the rear left of the vehicle, the
acoustic signal is emitted from the rear left loud‐
speaker.
The shorter the distance to an object, the shorter
the intervals become.
A continuous tone sounds if the distance to a
detected object is less than approximately
20 cm, 8 in.
Seite 279
Driver Assistance Systems
CONTROLS
279
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals