EasyManua.ls Logo

BMW 320e - Page 280

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If there are objects in front of and behind the ve‐
hicle at the same time, and they are at a distance
of less than approximately 20 cm, 8 in, an alter‐
nating continuous tone sounds.
Steptronic transmission: the intermittent tone
and the continuous tone are switched off when
selector lever position P is engaged.
The intermittent sound switches off a short while
after the vehicle comes to a standstill.
Volume control
The PDC acoustic signal volume can be adjus‐
ted.
1.
"CAR"
2. "Settings"
3. "Driver assistance"
4. "Parking and manoeuvring"
5. "Volume PDC signal"
6. Set the desired value.
The setting is saved for the current driver profile.
Visual warning
The vehicle's approach to an object is shown on
the Control Display. Objects that are further away
are already displayed before an acoustic signal is
given.
The display appears as soon as PDC is activated.
The recording range of the sensors is shown in
green, yellow and red if obstacles are detected
within the range.
Driving path lines are displayed for better estima‐
tion of the space required.
If the rear-view camera image is shown, it is pos‐
sible to change over to PDC or, if required, to an‐
other view with obstacle markings:
1. If necessary, push the Controller to the left.
2. For example "Parking sensors"
Crossing traffic warning: depending on the
equipment, the PDC display also warns of vehi‐
cles approaching from the sides at the front and
rear.
For further information:
Crossing traffic warning, see page 301.
System limits
Safety note
WARNING
The system may not respond at all, or may re‐
spond too late, incorrectly or without justifica‐
tion due to system limitations. There is a risk of
accident or material damage. Observe the in‐
formation on the system limits and intervene
actively if necessary.
Towing a trailer
The rear PDC functions are switched off when
the trailer socket is in use or when towing a
trailer.
A white symbol is shown.
Depending on the equipment, the detec‐
tion range of the sensors is shown dark
on the Control Display.
System limits of the sensors
For further information:
Ultrasonic sensors, see page 49.
Seite 280
CONTROLS
Driver Assistance Systems
280
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals